CM10-GD automatic focusing laser cutting head – Shenzhen Dizhao Intelligent Technology Co., Ltd

CM10-GD automatic focusing laser cutting head

The CM10-GD auto-focusing cutting head is an automatic zoom flat cutting head launched by DEZOE in 2019 for less than 2KW. The product has a built-in motor drive unit, which automatically changes the position within a range of about 17mm by driving the focus lens through a direct-connected sliding table. The user can set the continuous focus through the program to complete the rapid perforation and automatic cutting of plates or pipes of different thickness materials, and curved materials, especially the performance is outstanding on the 1.5KW pipe cutting machine and the three-dimensional machine.

Consult

Product characteristics

Technical parameter

Video demonstration

Data download

Beautiful structure design：

Lightweight design, elegant appearance. Gray has a strong industrial sense and is compatible with various brands of laser machine tools.

Optimize the protective mirror to reduce the installation risk First in the industry：

The upper protective lens cavity is equipped with a dust removal device, which prevents dust from falling into the collimator lens twice when the user replaces the upper protective lens, and reduces security risks. Patent protection.

Efficient breakthrough in collimating water cooling to extend lens life：

The most advanced multi-channel surround bridge water cooling extends the life of the lens with patent protection.

Hidden sensor socket：

The hidden installation of the sensor plug-in wire reduces the interference between the cutting head and peripheral factors.

Highly dustproof：

IP65 level, no dead ends, dustproof.

Closed loop stepping automatic zoom：

Using a closed-loop stepper motor, effectively avoid losing steps. The focusing speed is 100mm/s, and the repeatability is 1μm

Fast piercing and high-speed cutting：

16mm low carbon steel, piercing time <7 seconds, cutting speed 0.7m/min @1500W.

Power level: 2000W

Focal length of collimator lens: 100mm

Focusing lens focal length: 125mm, 150mm

Automatic focusing:

Recommended range: +8~-9 (limit range +9-10)

-Acceleration: ≤10m/s²

-Speed: ≤6m/min

-Accuracy: ≤50μm

Nozzle specifications: D28 market general model single layer, double layer, reduce the user’s cost of consumables

Nozzle aperture: 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm

Optical fiber interface: QBH, QD (if customers have special requirements, you can choose our QBH0300A with water cooling)

Focus clear aperture: 26.5mm

Protective lens

-Collimation protection lens: Φ21.5*2.0mm

-Focus protection lens: Φ28*4.0mm

Auxiliary gas pressure: ≤25bar

Weight: ~2.9kg

The corresponding configuration of the engineering drawing is: QBH-100-125-28-CM10-GD/BH-100-150-28-CM10-GD

CM10-GD Laser Cutting Head Manual.pdf